Scribner Commercial Roof Repair Contractor

With new fasteners, resealed laps, replacement panels where rust has thinned the steel, and new flashing. These buildings often have open eaves and damp air from livestock or stored grain, which rusts the panels from below. We check undersides from inside whenever possible, since that rust hides from the roof.

Scribner is on our repair list, so inspections are set up the same way as in Omaha. Send the address and a description of the drips or rust, and we arrange a visit that includes a look inside the building.

For most metal storage buildings: fastener replacement along leaking rows, resealed side and end laps, and a few replaced panels. Flat-roofed offices and shops get drain, lap, and flashing repairs instead, priced on the same written scope.

Drips on dry days usually come from condensation on cold panel undersides. That calls for ventilation or insulation changes inside, and roofing repairs alone will not stop it. We separate condensation from true leaks during the inside check and tell you which drips belong to the roof and which belong to the building.

Surface rust on firm steel can be cleaned and treated, and the panel stays. Panels with holes, or steel that flexes underfoot, have nothing left for a fastener to grip and get replaced.

Closing them is a building decision. Open eaves let birds and damp air in, which speeds underside rust, and closure strips reduce that. We point out where they would help during the inspection.

Yes. Work happens from the roof and from a lift inside where needed, and only the area directly under a panel being replaced has to be cleared or covered. Stored material elsewhere in the building stays where it is.